|
|
|
Home
Services
Degassing
Downloads
Hydro-lazing
Solids
Removal
Sitemap |
Made In the USA
24
Hour: Emergency
713-301 7441
Technology PROVEN Worldwide
Approved For Hot Work Zones
Trained Full Time Crews
No Open Flame
Equipment
Procedures
Technology
We have an
excellent reputation for working with regulatory
agencies.
|
Safety
Is Our Specialty
Strict: Operating Procedures Our safety record since 1985 stands for itself.
We monitor LEL before starting the unit and will interrupt
the starting sequence if an alarm conditions exists.
We have no points of ignition hotter than 800 degrees
F.
 Once the engine is running, we process
4000 ACFM
of air through the cabinet per engine. And the list
goes on.
In the event of system shutdown based on the automatic
detection of an incorrect operating condition, the
computer can be preprogrammed to restart after verifying
that all operating conditions are correct.
We are committed to
educating our employees through an ongoing safety
program and annual refresher courses to keep our
employees updated to the latest developments in our
industry as well as new OSHA requirements.
The
Phoenix S.A.V.E.™ Controller will not start
the engine when a safety "kill" switch has
been activated, for instance, due to high engine temperature,
low oil pressure or high water level in the moisture
knockout tank.
|
|
|
NO FLARE
WITH ICE TECHNOLOGY
FSI Provides
A quick safe turn around, which will allow you to
continue your work schedule.
The most cost effective method in the industry to
lower vapor concentration levels to safe levels.
FSI utilizes the highest safety standards possible,
which have allowed us to achieve a perfect safety
record.
A friendly, highly-trained team that will work to
fully satisfy your needs.
Advanced equipment and technology that is cutting-edge
to provide the results you requested.
SAFETY FEATURES
Dual flame arrestor
Constant LEL monitoring
No external power required
Automatic engine shutdown
Automatic fire control system
Remote monitoring capability
Automatic air-fuel ratio control system
Proven standard operating procedures
Redundant supplemental fuel shut off valves
On-board computer that monitors engine performance
Safety &
Environmental Issues
Today, cleaning the tank is only half the job.
Knowledge of safety and environmental issues,
government regulations, filing deadlines and the
requirements of the many regulatory agencies is
equally important.
Leading Successful Projects with Proactive Safety Practices.
|
|
|
|
|
|
|
Phone: +877-311-7441